PTFE Film Tape Chemical Resistance: Keep Acids and Solvents on a Replaceable Film
PTFE film tape resists strong acids, alkalis and solvents, is 0.15 mm thick and rated to 260°C. Compare film face and …
Heat Dissipation Tube Rated -30 to +210°C: One Sleeve from Cold Start to Full Load
Silicone Heat Dissipation Tube rated -30 to +210°C, above 4 kV and UL 94 V-0. See what the wide range means for power …
High-Permeability Low-Frequency EMI Absorbing Sheet for Noise Control Near FPCs and ICs
Place a thin EMI absorbing sheet near FPCs, ICs, or shield cans by checking permeability, frequency, thickness, and …
Masking Tape Tensile Strength Above 75 N/25mm: Long Pulls Without Breaks
Lixing masking tape: tensile strength above 75 N/25mm, 180° peel above 8 N/25mm, 155 ± 10 μm thick. What these mean for …
Aluminum Foil Thermal Tape Adhesion: Tack, Peel and Holding Power for Stable Heat Sink Bonding
H-TT-AL aluminum foil thermal tape: 0.6 kg/25mm loop tack, 1.5 kg/25mm adhesion to steel, 24 h holding. Learn what each …
G-TT-GY Fiberglass-Reinforced Thermal Silicone Tube: Insulate and Cool Power Devices with One Sleeve
G-TT-GY thermal silicone tube: 10^12 Ω·cm resistivity, ≥3 kV breakdown and UL 94 V-0, so one sleeve insulates and cools …
High-Temperature Conductive Cloth Tape: 80°C Long-Term Adhesion That Keeps EMI Grounding in Place
LX-DDB conductive cloth tape holds at 80°C long-term, has a 120°C short-term rating and ≥1.3 kgf/in peel. What to …
0.26 mm Thin Green Silicone Sheet: Reading 4 kV Withstand Voltage for Hot Pressing
Assess a 0.26 mm thin green silicone sheet with 1.0–1.5 W/m·K conductivity and ≥4 kV withstand voltage using E=V/d and …
4W Thermal Gel Across Temperature: Read Bondline and Contact Resistance Together
Review the -30 to 180°C operating range of 4W Thermal Gel with ASTM D5470 context for mean test temperature, bondline …
CCL and PCB Lamination Buffer Pad for Clearer Pressure Transfer Decisions
Check loaded area, temperature, hardness and release needs before specifying a gold silicone buffer pad.
Conductive Foam for Assembly Tolerance: Select Thickness from the Gap Distribution
Use RSS tolerance stacking to estimate enclosure gaps, then verify conductive foam thickness, contact, and assembly load …
Fiberglass Thermal Tape for Stable Bonding and Heat-Sink Fixing
Compare tack, holding power, and peel strength before sampling H-GT-WH fiberglass thermal tape on the actual substrate.