FPC Red Silicone Pad: Heat-Resistant Cushioning for Hot Press Lamination
Select an FPC red silicone pad by checking its 160–250°C operating range, 50 HA ±5 hardness, fiberglass reinforcement …
Aluminum Foil Silicone Sheet Service Life: 6,000 to 8,000 FPC Press Cycles With Fewer Pad Changes
An aluminum foil silicone sheet typically lasts 6,000 to 8,000 FPC press cycles. See the pressure, temperature and hot …
Kink-Resistant Transparent Silicone Tube: Keep Tight Bends Open
How diameter, wall thickness and 30A to 80A hardness affect kinking in transparent silicone tube, plus the sizes to send …
Thermal Conductive Silicone Cloth: Using UL 94 Data in Selection
Evaluate thermal silicone cloth using UL 94 V-0/V-1, thickness, thermal and insulation data while respecting the rating …
Thermal Silicone Encapsulant for High-Voltage Insulation: Fill the Gaps, Move the Heat
Two-part thermal silicone encapsulant with 10 kV/mm dielectric strength, 1×10^13 Ω·cm volume resistivity and UL 94 V-0 …
Co-extruded Nickel-Graphite Gasket for Low-Resistance Enclosure Contacts
Evaluate a nickel-graphite co-extruded gasket through resistivity, real contact area and compression fit for conductive …
Copper Foil Self-Adhesive Tape Saves Space in Thin Electronic Assemblies
See how copper foil self-adhesive tape supports thin assemblies, die cutting, and bonded heat paths, with clear model …
CPU/GPU Thermal Grease: Set a Thermal-Resistance Budget Before Validation
Convert CPU/GPU power and allowable temperature rise into a resistance budget, then validate thermal grease grade, bond …
LXFP-256 Silicone Foam for Vibration Damping: Shore C 25 vs 50 and Thickness
LXFP-256 silicone foam for vibration damping: Shore C 25 or 50, 0.6-12.7 mm thick, ASTM D1056 compression data and a …
Polyimide Gold Finger Tape at 260°C for 30 Minutes: Clean Removal After Plating and Paint Masking
YD-08-YL polyimide gold finger tape: 260°C for 30 min without deforming, 0.065 mm thick, 8 kV, peel ≥100 g/5mm. For PCB …
Silicone Foam Sponge Strips That Spring Back: Compression Recovery for Enclosure Seals
Silicone foam sponge strips and tubing, 28±3 Shore A, -100 to +300°C, UL 94 V-0. Read ASTM D395 compression set data and …
Heat Dissipation Tube Adds Flame-Rated Thermal Insulation Around Power Components
See how a UL 94 V-0 heat dissipation tube combines thermal transfer, electrical insulation, and flexible component …